Sureflow Wall Mounted Touch-Free Auto Fill Water Boiler 6L (Stainless Steel)
In stock
Product Code
U46265
For areas where hygiene is paramount, the new touch-free SureFlow On-Wall Boiler offers 100% contactless access to boiling water thanks to clever infrared sensors.
● Touch-Free Dispense (Sensor activated)
● Choice of water dispense mode - standard push & hold (on-demand) or metered/timed dispense (programmable)
● Top-up feature - allows user to top-up the drink following a measured dispense. Screen continues to flash for 5 seconds during which time the drink can be topped up. After 5 seconds, it reverts to timed dispense mode
● Quick and easy set-up of metered dispense, using memory function
● Safety light beam (vessel must be placed within cup recess area, to activate)
● Flashing safety message in LC Display (‘Caution Boiling Water’) – safety warning flashes as dispense is activated
● Includes easy-fit, spill-tray & bracket kit (place cup on spill-tray – no need to hold whilst boiling water is dispensed)
● Adjustable Water Temperature (80 to 98^C) – lower temperatures ideal for other drinks e.g. Green Tea
● Integral, programmable filter-monitor - optional if an external filter or softener has been fitted. Note: monitor is set to ‘Off’ as default but can be activated within ‘program set-up’. (measures water passing through the boiler and reminds the user [via display screen], when to change the filter)
● High Grade (‘rust free’ 304 Stainless steel construction throughout)
● WRAS Approval pending
Operation:
Switch boiler on…the display screen will illuminate and read ‘NOT READY’. Once boiler has heated up to the correct pre-set temperature, the LC display changes from Red to White and reads ‘READY’. The water temperature in degrees C is also displayed on the screen.
Note: The water temperature is factory-set to default; 96 degrees C (recommended). However, the temperature can be adjusted within ‘program set-up’, to between 80 and 98 degrees C.
To dispense boiling water:
Place a vessel within the recessed cup area. This breaks a safety light beam which in turn, sends a signal to the dispense sensor. The sensor will illuminate brighter, to indicate that it has been activated and ready for use.
There are two set-up options for dispensing boiling water;
On-demand (water is dispensed for as long as the sensor is activated by the presence of the operator’s hand)
Timed dispense (as soon as sensor is activated by passing a hand/finger in front of the sensor (within 25mm), a pre-set measured dose of water is automatically dispensed). This is ideal where the same size of cup/pot is always used.
Flashing Safety Warning: Whenever the boiler dispenses boiling water, a ‘CAUTION BOILING WATER’ message will flash in the display window, reminding the user to exercise caution.
Top-up Feature: In addition, at the end of the measured dispense cycle, the CAUTION’ message will continue to flash for a further 5 seconds. During this 5-second window, the water level in the cup or teapot can be ‘topped-up’ by simply passing hand/finger across the front of sensor to activate and top-up the drink (Note: Once the CAUTION message stops flashing, the top-up facility ends, and the boiler reverts back to timed dispense mode).
● Touch-Free Dispense (Sensor activated)
● Choice of water dispense mode - standard push & hold (on-demand) or metered/timed dispense (programmable)
● Top-up feature - allows user to top-up the drink following a measured dispense. Screen continues to flash for 5 seconds during which time the drink can be topped up. After 5 seconds, it reverts to timed dispense mode
● Quick and easy set-up of metered dispense, using memory function
● Safety light beam (vessel must be placed within cup recess area, to activate)
● Flashing safety message in LC Display (‘Caution Boiling Water’) – safety warning flashes as dispense is activated
● Includes easy-fit, spill-tray & bracket kit (place cup on spill-tray – no need to hold whilst boiling water is dispensed)
● Adjustable Water Temperature (80 to 98^C) – lower temperatures ideal for other drinks e.g. Green Tea
● Integral, programmable filter-monitor - optional if an external filter or softener has been fitted. Note: monitor is set to ‘Off’ as default but can be activated within ‘program set-up’. (measures water passing through the boiler and reminds the user [via display screen], when to change the filter)
● High Grade (‘rust free’ 304 Stainless steel construction throughout)
● WRAS Approval pending
Operation:
Switch boiler on…the display screen will illuminate and read ‘NOT READY’. Once boiler has heated up to the correct pre-set temperature, the LC display changes from Red to White and reads ‘READY’. The water temperature in degrees C is also displayed on the screen.
Note: The water temperature is factory-set to default; 96 degrees C (recommended). However, the temperature can be adjusted within ‘program set-up’, to between 80 and 98 degrees C.
To dispense boiling water:
Place a vessel within the recessed cup area. This breaks a safety light beam which in turn, sends a signal to the dispense sensor. The sensor will illuminate brighter, to indicate that it has been activated and ready for use.
There are two set-up options for dispensing boiling water;
On-demand (water is dispensed for as long as the sensor is activated by the presence of the operator’s hand)
Timed dispense (as soon as sensor is activated by passing a hand/finger in front of the sensor (within 25mm), a pre-set measured dose of water is automatically dispensed). This is ideal where the same size of cup/pot is always used.
Flashing Safety Warning: Whenever the boiler dispenses boiling water, a ‘CAUTION BOILING WATER’ message will flash in the display window, reminding the user to exercise caution.
Top-up Feature: In addition, at the end of the measured dispense cycle, the CAUTION’ message will continue to flash for a further 5 seconds. During this 5-second window, the water level in the cup or teapot can be ‘topped-up’ by simply passing hand/finger across the front of sensor to activate and top-up the drink (Note: Once the CAUTION message stops flashing, the top-up facility ends, and the boiler reverts back to timed dispense mode).
| Colour | Stainless Steel |
|---|---|
| Brand | Instanta |
| Manufacturer Part Code | DB600-TFW |
| Product Type | Wall Mounted Water Heater |
| Range | Sureflow |
| Capacity | 6 L |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
