Satronic DKO 970 Oil 1 Stage Control Box
In stock
Product Code
419416
Honeywell Satronic DKO 970 Mod. 05for one - or two-stage oil burners up to 30 kg/h, diesel and gas burners, heat generators, gas boilers
Flame detection:
- Photoresistor MZ 770 S
- Infrared-flicker detector IRD 1010.1
- UV flame sensor UVD 970
Control units with oil burner DKO 970 mod.05 for oil burners with capacity up to 30 kg /h. They are approved and certified in accordance with European standards and regulations.
Programming sequence based on a microprocessor ensures extremely stable timings independent of voltage variations,ambient temperature and /or cycles.
Built-in information system not only provides continuous monitoring of the actual status (very useful especially to monitor the launch phase) but also informs about the cause of possible blockage. The reason for the block is stored so that it can be accessed even after power failure.
The control unit is designed for maximum safety in case of fluctuations of the supply voltage. If the voltage is falling below an acceptable level, operation is interrupted and the control unit automatically prevents the launching. Thus, the security system will not be under threat when the voltage drop of the network. This low voltage protection works not only during startup but also during operation.
The control unit DKO 970 Mod. 05-protected fire resistant,transparent body.
Manual reset from lock and setting the lock is provided by a button with integrated led information system.DKO 970 is compatible with TF 801 TF 801.2,TF 830, TF 830.2.
Flame detection:
- Photoresistor MZ 770 S
- Infrared-flicker detector IRD 1010.1
- UV flame sensor UVD 970
Control units with oil burner DKO 970 mod.05 for oil burners with capacity up to 30 kg /h. They are approved and certified in accordance with European standards and regulations.
Programming sequence based on a microprocessor ensures extremely stable timings independent of voltage variations,ambient temperature and /or cycles.
Built-in information system not only provides continuous monitoring of the actual status (very useful especially to monitor the launch phase) but also informs about the cause of possible blockage. The reason for the block is stored so that it can be accessed even after power failure.
The control unit is designed for maximum safety in case of fluctuations of the supply voltage. If the voltage is falling below an acceptable level, operation is interrupted and the control unit automatically prevents the launching. Thus, the security system will not be under threat when the voltage drop of the network. This low voltage protection works not only during startup but also during operation.
The control unit DKO 970 Mod. 05-protected fire resistant,transparent body.
Manual reset from lock and setting the lock is provided by a button with integrated led information system.DKO 970 is compatible with TF 801 TF 801.2,TF 830, TF 830.2.
| Brand | Satronic |
|---|---|
| Manufacturer Part Code | DKO 970 |
| Product Type | Control Box |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
