Powerflow Flux 350g
In stock
Product Code
581131
Powerflow Flux is a soft, white paste which is easily applied to jointing areas prior to soldering. It is designed for the soldering of copper plumbing systems and is suitable for use with a wide range of metals and alloys. It contains no zinc oxide.
● Market leading, proven product. Well established product
● Self cleaning
● Easy to apply
● Effective soldering flux
● WRAS approved product – suitable for potable water applications
● Suitable for both lead containing and lead-free solder alloys
Application, Fitting & Dosing
Clean the pipe to remove metal swarf/grease. Apply the flux carefully to the outside of the pipe surface in the area in which the joint is to be made. Only a very thin layer of flux is required. We do not recommend applying this to the inside of the fitting because any excess flux will be pushed into the tube when pushing the two halves of the joint together. Do not use too much flux. When soldering, Powerflow Flux can be used effectively with both end feed and integral ring solder fittings. It is also appropriate for lead containing or lead free solders. Powerflow wire or Grade 99C wire are recommended.To minimise the likelihood of corrosion difficulties, it is recommended that the system be flushed out with water as soon as possible after completion. This can be aided by using a proprietary cleaner, such as Fernox Cleaner F3/F5/F8.
Powerflow Flux is WRAS approved. It passed tests for use in both hot and cold water systems and is listed in the UK Water Fittings and Materials Directory. Powerflow Flux has been successfully used in gas systems for many years. However, there are people who prefer not to use a self-cleaning flux in a gas pipe system. If this is a concern, then Fluxite Paste flux is recommended.
Package, Handling & Safety
Powerflow Flux may cause damage to the eyes. Eye protection is recommended when using this product. Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show the container or label.
Physical Specification / Properties
Colour: White
Odour: Mild
Form: Paste
pH: <2 SG: 1.1 @ 20°C
● Market leading, proven product. Well established product
● Self cleaning
● Easy to apply
● Effective soldering flux
● WRAS approved product – suitable for potable water applications
● Suitable for both lead containing and lead-free solder alloys
Application, Fitting & Dosing
Clean the pipe to remove metal swarf/grease. Apply the flux carefully to the outside of the pipe surface in the area in which the joint is to be made. Only a very thin layer of flux is required. We do not recommend applying this to the inside of the fitting because any excess flux will be pushed into the tube when pushing the two halves of the joint together. Do not use too much flux. When soldering, Powerflow Flux can be used effectively with both end feed and integral ring solder fittings. It is also appropriate for lead containing or lead free solders. Powerflow wire or Grade 99C wire are recommended.To minimise the likelihood of corrosion difficulties, it is recommended that the system be flushed out with water as soon as possible after completion. This can be aided by using a proprietary cleaner, such as Fernox Cleaner F3/F5/F8.
Powerflow Flux is WRAS approved. It passed tests for use in both hot and cold water systems and is listed in the UK Water Fittings and Materials Directory. Powerflow Flux has been successfully used in gas systems for many years. However, there are people who prefer not to use a self-cleaning flux in a gas pipe system. If this is a concern, then Fluxite Paste flux is recommended.
Package, Handling & Safety
Powerflow Flux may cause damage to the eyes. Eye protection is recommended when using this product. Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show the container or label.
Physical Specification / Properties
Colour: White
Odour: Mild
Form: Paste
pH: <2 SG: 1.1 @ 20°C
| Colour | Yellow |
|---|---|
| Brand | Fernox |
| Manufacturer Part Code | 20436 |
| Range | Powerflow |
| Standards | wras |
| Product Type | Flux |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
