Panasonic Aquarea Modbus Interface for J Generation Units
In stock
Product Code
U29010
The PAW-AW-MBS-H (or PA-AW2-MBS-1 as per IntesisBox reference) interface allows a complete and naturalintegration of Panasonic Air-to-Water Systems into Modbus RTU (EIA-485) networks. Compatible with Aquarea H models from Panasonic
Reduced dimensions. 93 x 53 x 58 mm.3.7” x 2.1” x 2.3”
• Quick and easy installation.
- Mountable on DIN rail, wall, or even inside the Hydro unit.
• External power not required.
• Direct connection to Modbus RTU (EIA-485) networks. Up to 63 PAW-AW-MBS-H devices can be connected in the same network.
PAW-AW-MBS-H is a Modbus slave device.
• Direct connection to the Hydro unit. Up to 1 Hydro unit can be connected to PAW-AW-MBSH. The cable for this connection is also supplied.
• Configuration from both on-board DIP-switches and Modbus RTU.
• Total Control and Supervision.
• Real states of the Hydro unit's internal variables.
• Allows simultaneous use of the remote controls of the Hydro unit and Modbus RTU.
Reduced dimensions. 93 x 53 x 58 mm.3.7” x 2.1” x 2.3”
• Quick and easy installation.
- Mountable on DIN rail, wall, or even inside the Hydro unit.
• External power not required.
• Direct connection to Modbus RTU (EIA-485) networks. Up to 63 PAW-AW-MBS-H devices can be connected in the same network.
PAW-AW-MBS-H is a Modbus slave device.
• Direct connection to the Hydro unit. Up to 1 Hydro unit can be connected to PAW-AW-MBSH. The cable for this connection is also supplied.
• Configuration from both on-board DIP-switches and Modbus RTU.
• Total Control and Supervision.
• Real states of the Hydro unit's internal variables.
• Allows simultaneous use of the remote controls of the Hydro unit and Modbus RTU.
| Brand | Panasonic |
|---|---|
| Manufacturer Part Code | PAW-AW-MBS-H |
| Range | Aquarea |
| Product Type | Heat Pump Accessory |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
