Danfoss RA-FN15 1/2" Vertical Angled Radiator Valve

In stock
Product Code
247008
The RA-FN valve bodies are used in two-pipe heating systems.
The valves are manufactured from brass with nickel plating. The pressure pin of the gland seal
is of chromium steel and works in a lifetime lubricated O-ring seal. The complete gland
assembly can be replaced without draining down the system.
The valves are supplied with a grey protective cap, which can be used for manual regulation
during the construction phase. The protective cap must not be used as a manual shut off
device. A special manual shut off device (code no. 013G3300) should be used.
Compression fittings for 15 mm, 10 mm or 8 mm copper tube are available for RA-FN with 3/8” and 1/2” connections.
In order to avoid deposition and corrosion, the composition of the hot water must be in
accordance with the VDI 2035 guideline (Verein Deutscher Ingenieure).
It is recommended that formulations containing mineral oil are avoided.
All RA-FN valve bodies can be used together with all types of thermostatic elements in the Danfoss RA2000 series.
• RA-FN (Normal flow valves for two-pipe systems)
• Max working pressure: 10 bar
• Max Flow temperature: 120° C
• Connection size in Rp 1/2
• Connection size out R 1/2
More Information
BrandDanfoss
Manufacturer Part Code013G002300
RangeRadiator Valves & Accessories
Product TypeThermostatic Radiator Valve
Pressure10 bar
Warranty2 years
pdf icon
pdf icon
pdf icon

Collection:

  • You can select the branch where you would like to collect your order.
  • We will send you an email when your order is ready to be collected.
  • Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
  • If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
  • You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.

Delivery:

  • There is a delivery charge of €35 for any order under €500
  • You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
  • Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
  • You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.

Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.