Danfoss ATC Wireless Electronic Cylinder Thermostat
In stock
Product Code
306215
The CET 2000B-RF is a battery powered RF cylinder thermostat which measures cylinder temperature using a strap-on cylinder temperature sensor.
The sensor is fitted to the cylinder wall and wires directly to the thermostat, which is normally
located adjacent to the cylinder.
The clamp-on sensor comes complete with a spacer piece to enable installation with most
thicknesses of cylinder insulation (25-55mm).
A receiver unit is mounted next to the boiler or zone valve and responds to commands issued by the thermostat over secure wireless connection.
This avoids the need for wiring between the thermostat and boiler or zone valve, reducing
installation time and cabling.
This arrangement is perfectly suited for new installations where furnishings prohibit running
recessed or surface mounted cabling, and in existing installations where the cylinder is being
moved or replaced.
The CET2000B-RF includes a large easy to read LCD display which is backlit for viewing in dimly
lit locations.
Hot water temperature adjustment is made by simple up/down buttons and the digital display
allows acurate setting. In normal operation the display will show the cylinder temperature, when the buttons are pressed, the display changes and flashes the set temperature required.
A flame icon is displayed whenever the thermostat is calling for hot water demand and an aerial icon confirms that the thermostat is connected to the receiver.
The Thermostat can be placed in a standby mode where hot water isn’t required for prolonged
periods or where tampering is an issue the set temperature can be locked, both modes indicated by icons on the display.
The display also gives indication when the batteries need replacing and should there be
an issue with the cylinder sensor error codes are shown.
The sensor is fitted to the cylinder wall and wires directly to the thermostat, which is normally
located adjacent to the cylinder.
The clamp-on sensor comes complete with a spacer piece to enable installation with most
thicknesses of cylinder insulation (25-55mm).
A receiver unit is mounted next to the boiler or zone valve and responds to commands issued by the thermostat over secure wireless connection.
This avoids the need for wiring between the thermostat and boiler or zone valve, reducing
installation time and cabling.
This arrangement is perfectly suited for new installations where furnishings prohibit running
recessed or surface mounted cabling, and in existing installations where the cylinder is being
moved or replaced.
The CET2000B-RF includes a large easy to read LCD display which is backlit for viewing in dimly
lit locations.
Hot water temperature adjustment is made by simple up/down buttons and the digital display
allows acurate setting. In normal operation the display will show the cylinder temperature, when the buttons are pressed, the display changes and flashes the set temperature required.
A flame icon is displayed whenever the thermostat is calling for hot water demand and an aerial icon confirms that the thermostat is connected to the receiver.
The Thermostat can be placed in a standby mode where hot water isn’t required for prolonged
periods or where tampering is an issue the set temperature can be locked, both modes indicated by icons on the display.
The display also gives indication when the batteries need replacing and should there be
an issue with the cylinder sensor error codes are shown.
| Brand | Danfoss |
|---|---|
| Manufacturer Part Code | 041E001000 |
| Product Type | Thermostat |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
