Worcester Bosch GB402 Gas Condensing Boiler
In stock
Only %1 left
Product Code
CP0489
Compact, quiet and perfect for both new build and renovation projects. It combines high efficiency and low emissions with a wide range of practical benefits.
At a glance
● Compact, quiet and perfect for both new build and renovation projects
● It combines high efficiency and low emissions with a wide range of practical benefits
● Nox emissions below 40mg/kWh
● Efficiency (NCV) up to 110.4% at 40/30 degrees celsius
● Suitable for use with a wide range of controllers (RC35, EM10, MCM10, 8000 Series)
● Suitable to use with a balanced flue arrangement
Overview
● Available in 5 outputs the GB402 high efficiency commercial boiler with up to 110% efficiency (NCV).
● Ideal for single or multiple boiler installations in medium to large buildings, including schools, hotels, care homes, offices and commercial buildings.
● This boiler must be installed in a sealed system. Bosch Commercial and Industrial supply a range of system separation Plate Heat Exchangers to aid sealed system installations.
Construction
Servicing and Maintenance: The GB402 is designed to minimise installation time and effort, and, in the long run, its efficient construction ensures minimised operating costs. The factory-fitted gas-fired burner is tested and set up for optimal and clean combustion. Servicing is also simple. Large inspection apertures make access to components particularly easy and all internal components can be easily cleaned or replaced if necessary.
Performance and Design: The GB402 has been developed to achieve lower running costs, a reduced carbon footprint and low Nox emissions. This is achieved through the use of a powerful, lightweight and fully insulated cast aluminium heat exchanger. The clean burning, pre-mix burner and intelligent combustion controller enable the GB402 to operate in a wide modulation range of between 20% to 100%, with efficiency up to 110% (NCV).
At a glance
● Compact, quiet and perfect for both new build and renovation projects
● It combines high efficiency and low emissions with a wide range of practical benefits
● Nox emissions below 40mg/kWh
● Efficiency (NCV) up to 110.4% at 40/30 degrees celsius
● Suitable for use with a wide range of controllers (RC35, EM10, MCM10, 8000 Series)
● Suitable to use with a balanced flue arrangement
Overview
● Available in 5 outputs the GB402 high efficiency commercial boiler with up to 110% efficiency (NCV).
● Ideal for single or multiple boiler installations in medium to large buildings, including schools, hotels, care homes, offices and commercial buildings.
● This boiler must be installed in a sealed system. Bosch Commercial and Industrial supply a range of system separation Plate Heat Exchangers to aid sealed system installations.
Construction
Servicing and Maintenance: The GB402 is designed to minimise installation time and effort, and, in the long run, its efficient construction ensures minimised operating costs. The factory-fitted gas-fired burner is tested and set up for optimal and clean combustion. Servicing is also simple. Large inspection apertures make access to components particularly easy and all internal components can be easily cleaned or replaced if necessary.
Performance and Design: The GB402 has been developed to achieve lower running costs, a reduced carbon footprint and low Nox emissions. This is achieved through the use of a powerful, lightweight and fully insulated cast aluminium heat exchanger. The clean burning, pre-mix burner and intelligent combustion controller enable the GB402 to operate in a wide modulation range of between 20% to 100%, with efficiency up to 110% (NCV).
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
