Sureflow Plus Touch Countertop Boiler with Push Button 15L
In stock
Product Code
U46275
Ideal for self-service, the DB2000 has an optional advanced programmable locking system. This allows the unit to be ready for use at the touch of an electronic key and is perfect for high security users or where health and safety is a concern.
Features and Benefits
● Electronically controlled for constant temperatures
● Programmable down to 80°C if required
● Simple push and hold dispense button
● Energy saving ECO mode
● Lock-off setting using electronic key-fob
● Early warning LCD diagnostics
● Five water level sensors
Installation
Counter mounted with drip tray.
Plumbing
Designed for direct connection to a potable cold water supply using the 1.5 metre (3/4” BSP) hose supplied. An isolating valve should be installed
between the supply and the heater. Rear supply connection and choice of rear or front overflow.
Electrical
Fitted with 1.75 metres of cable and a 13amp moulded plug.
Construction
Brushed stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut-outs.
Approvals
WRAS approved.
Locking System
The locking system is activated by touching an electronic key fob against a sensor (located below the display panel).
The boiling water dispense function can be set up in four different ways;
1 NONE/OPEN (Standard setting) – No lock. Simply push & hold button to dispense boiling water.
2 TOGGLE - Key fob turns the dispense function on and off sequentially, as required.
3 TIMED – Boiling water dispense is available for a pre-set time (adjustable in minutes), determining how long it can be used before locking off.
4 ONE-SHOT – A single drink can be dispensed before the boiling water function locks off. One key fob is supplied with each boiler with additional keys available from Instanta spares department (Part No: D2000L). Up to 20 individual keys can be programmed.
Features and Benefits
● Electronically controlled for constant temperatures
● Programmable down to 80°C if required
● Simple push and hold dispense button
● Energy saving ECO mode
● Lock-off setting using electronic key-fob
● Early warning LCD diagnostics
● Five water level sensors
Installation
Counter mounted with drip tray.
Plumbing
Designed for direct connection to a potable cold water supply using the 1.5 metre (3/4” BSP) hose supplied. An isolating valve should be installed
between the supply and the heater. Rear supply connection and choice of rear or front overflow.
Electrical
Fitted with 1.75 metres of cable and a 13amp moulded plug.
Construction
Brushed stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut-outs.
Approvals
WRAS approved.
Locking System
The locking system is activated by touching an electronic key fob against a sensor (located below the display panel).
The boiling water dispense function can be set up in four different ways;
1 NONE/OPEN (Standard setting) – No lock. Simply push & hold button to dispense boiling water.
2 TOGGLE - Key fob turns the dispense function on and off sequentially, as required.
3 TIMED – Boiling water dispense is available for a pre-set time (adjustable in minutes), determining how long it can be used before locking off.
4 ONE-SHOT – A single drink can be dispensed before the boiling water function locks off. One key fob is supplied with each boiler with additional keys available from Instanta spares department (Part No: D2000L). Up to 20 individual keys can be programmed.
| Colour | Stainless Steel |
|---|---|
| Brand | Instanta |
| Manufacturer Part Code | DB2000 |
| Product Type | Countertop Water Heater |
| Range | Sureflow Plus |
| Connection Size | 3/4'' BSP |
| Standards | Wras approved |
| Capacity | 15 L |
| Height | 608 mm |
| Width | 260 mm |
| Warranty | 2 Year Warranty |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
