Screwtite 20mm - R ½" 316 Male Elbow
In stock
Product Code
U36180
The Screwtite fitting series are nickel plated compression brass fittings for mulitlayer pipe. These types of fittings are used in various areas, but they are manily used for the contruction of drinking water distribution systems, sanitary systems etc.
This series is produced in accordance with regulations of D.M no 174 of the 6th April 2004 on materials and objects that can be used in installations for water distribution intended for human consumption and respects all the following legislations to ensure a reliable and high quality product.
This is line certified with German Laboratory DVGW and Complies with
● EN681-1
● UNI EN 1254-3
● EN 10954-2
The TDM Brass threaded fittings are produced in accordance with regulations ISO 228 cylindrical gas threading
All the forged brass fittings are produced in accordance with the regulations of the legislation UNI EN 12165 with brass CW617N - CuZn40Pb2.
Galvanic Treatments - To satisfy the regulations of the D.M no 174 of 6th April 2004 and allow the use of fittings in installation for water distribution for human consumption, all nickle plated and chrome plated articles satisfy the requirements for the legislation UNI ISO 92 27 for the corrosion and the legislation UNI ISO 28 19 for adherence.
System Information - The seal between the pipe and the fittings is guaranteed by the presence of a double EPDM PEROX O-Ring (in accordance with the regulations UNI EN 681-1:2006) placed on the fitting's body. The joingin of the pipe occurs by radial compression provided by the engagement of the nut which results in the compression of the split olive around the pipe and axial compression on the O-Ring against the body. Finally, the fitting is also equipped with a teflon ring that guarantees the dielectric isolation between the aluminium of the pipe and the brass of the fitting, preventing the stress - corrosion that could damage the components (pipe and fittings).
This series is produced in accordance with regulations of D.M no 174 of the 6th April 2004 on materials and objects that can be used in installations for water distribution intended for human consumption and respects all the following legislations to ensure a reliable and high quality product.
This is line certified with German Laboratory DVGW and Complies with
● EN681-1
● UNI EN 1254-3
● EN 10954-2
The TDM Brass threaded fittings are produced in accordance with regulations ISO 228 cylindrical gas threading
All the forged brass fittings are produced in accordance with the regulations of the legislation UNI EN 12165 with brass CW617N - CuZn40Pb2.
Galvanic Treatments - To satisfy the regulations of the D.M no 174 of 6th April 2004 and allow the use of fittings in installation for water distribution for human consumption, all nickle plated and chrome plated articles satisfy the requirements for the legislation UNI ISO 92 27 for the corrosion and the legislation UNI ISO 28 19 for adherence.
System Information - The seal between the pipe and the fittings is guaranteed by the presence of a double EPDM PEROX O-Ring (in accordance with the regulations UNI EN 681-1:2006) placed on the fitting's body. The joingin of the pipe occurs by radial compression provided by the engagement of the nut which results in the compression of the split olive around the pipe and axial compression on the O-Ring against the body. Finally, the fitting is also equipped with a teflon ring that guarantees the dielectric isolation between the aluminium of the pipe and the brass of the fitting, preventing the stress - corrosion that could damage the components (pipe and fittings).
| Brand | Screwtite |
|---|---|
| Manufacturer Part Code | 910316003 |
| Range | Fittings |
| Product Type | Elbow |
| Size | 20mm - R ½" |
| Model | 316 |
| Material | Brass |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
