PressureWave Series 18 Litre Inline Pressure Vessel

In stock
Product Code
U39402
18 Litre Pressure Vessel for use with Pressure Boosting Sets mainly for Domestic Pressure Boosting and Light Commercial Use

The PressureWave™ Pressure Vessel Series is constructed of a virgin polypropylene liner combined with an FDA approved high grade butyl diaphragm. This is held against the wall of the tank with a steel clench ring. The brass air valve, sealed by a threaded o-ring valve cap, prevents air leaks. Water enters the tank through a patented stainless steel water connection. The diaphragm and liner are both reinforced in specific wear areas for longer life. All internal parts including the air valve are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water/air seal ensuring a complete leak free and maintenance free pressure vessel.

On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection.

CONSTRUCTION
• Single diaphragm design
• NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved
• Patented stainless steel water connection
• Virgin polypropylene liner
• Two part polyurethane, epoxy primed paint finish
• Leak free, o-ring sealed air valve cap
• Comprehensive testing
• No maintenance
• Standard System Connection: 1″

APPLICATION LIMITS
• Tank precharge: 1.9 bar / 28 psi
• Maximum working temperature: 90 °C
• Maximum working pressure: 10 bar
More Information
ColourWhite
BrandPressure Wave
Manufacturer Part CodePWB-18LX
PositionInline
Product TypePotable Vessel
Capacity18 L
Height367 mm
Width279 mm
pdf icon

Collection:

  • You can select the branch where you would like to collect your order.
  • We will send you an email when your order is ready to be collected.
  • Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
  • If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
  • You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.

Delivery:

  • There is a delivery charge of €35 for any order under €500
  • You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
  • Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
  • You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.

Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.