My Energi Eddi Solar Power Diverter

Use your excess energy and save
Bring an eddi into your home and you can make the most of the 100% green energy generated from your solar PV or wind generation system.

Rather than exporting it back to the grid, your power generation investment becomes more efficient, with our intelligent eddi power diverter your excess power is diverted back to your heating systems.

Monitor power generation
Your eddi power diverter will include a grid current sensor, aka a CT Clamp (Current Transducer), which monitors your power generation and diverts the excess to your heating devices. The eddi logs all energy saving data to enable ongoing savings by optimising usage.

There is also an intelligent daylight-saving time adjustment with overload and short-circuit protection for your peace of mind. You can also opt for a wireless install, paired with harvi eddi is fully compliant with worldwide power grid standards and comes with a 3-year warranty.

Perfect pair
Perfectly pair all your myenergi devices easily, go wireless with harvi and control your homes’ flow of energy with the myenergi hub & app.

Features

• Harness the sun: eddi interrupts the flow of excess energy produced being imported back to the grid and optimises its use by diverting the energy to heat appliances.


• Set timers: At certain hours ‘time of use energy tariffs’ are significantly cheaper. So with eddi, you can utilise the built-in programmable boost timers to ensure you get the most from your PV!


• Save for later: Eddi is also compatible with energy storage appliances, such as a battery wall. So, if you don’t need the excess right away, you can divert it to your storage device to use later, when you need it.


• Remote access
  The myenergi app & hub allow you to access your devices from anywhere in the world! Visual graphs allow you to monitor your import/export information all in one place.

Electrical Specifications
• Rated Input Power : 3.68kW
• Rated Supply Voltage: 230V AC Single Phase (+/- 10%)
• Supply Frequency: 50Hz / 60Hz
• Rated Current: 16A
• Standby Power Consumption: 3W
• Generator Size Supported: No limit (subject to 100A per-phase grid supply)
• Heater Load Size: 100W min. 3.68kW max.
• Economy Tariff Sense Input: 230V AC sensing (2.5kV isolated)
• Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options
• Grid Current Sensor: 65A max. primary current, 16mm max. cable diameter
• Supply Cable Entry: Rear, bottom, or side option

Mechanical Specifications
• Dimensions: 220 x 205 x 87mm (excluding wall bracket)
• Weight 4.3kg (excluding wall bracket)
• Protection Degree: IP20
• Enclosure Material: Painted Zintec steel
• Operating Temperature: -20°C to +40°C
• Mounting Method: Wall mounting bracket