Heatmiser Wireless Air Sensor
In stock
Product Code
U18429
The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required.
The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.
Using the Wireless Air Sensor with the Neo System
With this new addition, your Neo system is now even smarter. The wireless air sensor allows you to measure the temperature from a single wireless air sensor or multiple sensors if you are looking to average the temperature over a larger area.
Our Wireless Air Sensor pairs to the neoHub Gen 2 using the Android or iOS apps. Once linked, you can decide how the system will operate;
• Monitoring – This allows you to simply measure the temperature in another area of your home.
• Pair to Zone – This allows you to pair the sensor to a neoStat you already have setup in your system.
If you select Pair to Zone, you now have 2 options.
• Averaging – If you select this option, the thermostat will average the temperature with the internal sensor in the thermostat.
• Remote Only – If you select this option, the internal sensor will be turned off and the remote sensor will become the air sensor for the zone selected. If you then pair additional remote sensors, they system will then give an averaged reading.
Specification
Range: 40 meters open space. Please note the wireless sensor pairs directly to the neoHub and does not benefit from the mesh network. Therefore you may require additional neoPlug or Boosts to extend the signal around your home.
RF Frequency: 868MHz
IP Protection: IP20
Important Neo Compatibility Notes
• RF Sensor support is only available on the neoHub Gen 2. To determine if you have a neoHub Gen 2, look at the rear of your neoHub for a label marked “2nd generation” If in doubt contact our support team on 01254 669090.
• The RF sensors are not visible in HomeKit, Google Home, Alexa, IFTTT at this time.
• The RF sensors communicate directly to the neoHub. Depending on signal strength in your home, you may require additional boosters such as the neoPlug or Boost available here.
• For compatible thermostats, consult the Wireless Air Sensor Datasheet.
The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.
Using the Wireless Air Sensor with the Neo System
With this new addition, your Neo system is now even smarter. The wireless air sensor allows you to measure the temperature from a single wireless air sensor or multiple sensors if you are looking to average the temperature over a larger area.
Our Wireless Air Sensor pairs to the neoHub Gen 2 using the Android or iOS apps. Once linked, you can decide how the system will operate;
• Monitoring – This allows you to simply measure the temperature in another area of your home.
• Pair to Zone – This allows you to pair the sensor to a neoStat you already have setup in your system.
If you select Pair to Zone, you now have 2 options.
• Averaging – If you select this option, the thermostat will average the temperature with the internal sensor in the thermostat.
• Remote Only – If you select this option, the internal sensor will be turned off and the remote sensor will become the air sensor for the zone selected. If you then pair additional remote sensors, they system will then give an averaged reading.
Specification
Range: 40 meters open space. Please note the wireless sensor pairs directly to the neoHub and does not benefit from the mesh network. Therefore you may require additional neoPlug or Boosts to extend the signal around your home.
RF Frequency: 868MHz
IP Protection: IP20
Important Neo Compatibility Notes
• RF Sensor support is only available on the neoHub Gen 2. To determine if you have a neoHub Gen 2, look at the rear of your neoHub for a label marked “2nd generation” If in doubt contact our support team on 01254 669090.
• The RF sensors are not visible in HomeKit, Google Home, Alexa, IFTTT at this time.
• The RF sensors communicate directly to the neoHub. Depending on signal strength in your home, you may require additional boosters such as the neoPlug or Boost available here.
• For compatible thermostats, consult the Wireless Air Sensor Datasheet.
| Colour | White |
|---|---|
| Brand | Heatmiser |
| Manufacturer Part Code | RF SENSOR |
| Product Type | Wireless Thermostat |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
