Fernox Heat Pump Transfer Fluid HP-5c 20L
In stock
Product Code
U49666
A non-toxic, concentrated heat transfer fluid for Air and Ground Source Heat Pumps and underfloor heating systems. This product is designed to protect against corrosion, limescale and bacterial contamination, as well as frost protection from -4 to -14°C.
● Concentrated heat transfer fluid suitable for Air and Ground Source Heat Pumps and underfloor heating
● Provides frost protection from -4°C to -14°C
● Protects against corrosion, limescale and bacterial contamination
● High performance, non-toxic formulation
● Compatible with all materials commonly found in Heat Pump and underfloor heating systems
● pH stable product
Application, Fitting & Dosing
● Dilute before use using mains water. In order to ensure adequate corrosion and biocidal protection, the minimum “in-use” concentration of the product is 33%. Maximum “in-use” concentration is 50%. Upon dilution Fernox HP-15c will provide frost protection according to the table below.
● Concentration 33% 40% 50%
● Frost Protection -14°C -22°C -34°C
● Frost protection levels can be checked using a Fernox Refractometer. Existing heating systems should be cleaned of sludge and limescale deposits with a suitable Fernox Cleaner before adding Fernox HP-15c.
Package, Handling & Safety
● Fernox HP-15c is supplied in 25 litre drums.
● Keep out of reach of children. Do not mix with other chemicals. For further information, please consult the Safety Data Sheet (SDS).
Physical Specification / Properties
Composition: An aqueous solution of monopropylene glycol with specifically formulated inhibitors, stabilisers and biocides.
● Odour: Slight
● Form: Liquid
● Appearance: Red liquid
● S.G.: 1.04
● pH: 7.7
● Concentrated heat transfer fluid suitable for Air and Ground Source Heat Pumps and underfloor heating
● Provides frost protection from -4°C to -14°C
● Protects against corrosion, limescale and bacterial contamination
● High performance, non-toxic formulation
● Compatible with all materials commonly found in Heat Pump and underfloor heating systems
● pH stable product
Application, Fitting & Dosing
● Dilute before use using mains water. In order to ensure adequate corrosion and biocidal protection, the minimum “in-use” concentration of the product is 33%. Maximum “in-use” concentration is 50%. Upon dilution Fernox HP-15c will provide frost protection according to the table below.
● Concentration 33% 40% 50%
● Frost Protection -14°C -22°C -34°C
● Frost protection levels can be checked using a Fernox Refractometer. Existing heating systems should be cleaned of sludge and limescale deposits with a suitable Fernox Cleaner before adding Fernox HP-15c.
Package, Handling & Safety
● Fernox HP-15c is supplied in 25 litre drums.
● Keep out of reach of children. Do not mix with other chemicals. For further information, please consult the Safety Data Sheet (SDS).
Physical Specification / Properties
Composition: An aqueous solution of monopropylene glycol with specifically formulated inhibitors, stabilisers and biocides.
● Odour: Slight
● Form: Liquid
● Appearance: Red liquid
● S.G.: 1.04
● pH: 7.7
| Colour | Blue |
|---|---|
| Brand | Fernox |
| Manufacturer Part Code | 62544 |
| Product Type | Heat Pump Fluid |
| Capacity | 20 L |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
