Duomo DFL10 Fusible Link
In stock
Product Code
U39883
The Duomo DFL10 is a thermal fusible link. It breaks the electrical supply to Gas safety shut off valves when temperatures exceed 72 degrees Centigrade.
A Thermal Fusible Link is usually placed above boilers in plant rooms. Mainly used to cut off the electrical supply to the Gas safety shut off valve See Duomo VMR. If the temperature goes above 72 degrees the link will isolate the fuel supply into the safe area.
The link itself is replaceable and mounted above potential sources of heat, for example above a gas valve train or gas burner on a boiler.
The DFL10 link works with all Duomo Solenoid valves, please see our related products below.
72 degrees centigrade fuse temperature
- IP30 protective rating
- 250V AC 10A maximum load
- 20mm cable entry
- Replaceable link (contact Duomo)
A Thermal Fusible Link is usually placed above boilers in plant rooms. Mainly used to cut off the electrical supply to the Gas safety shut off valve See Duomo VMR. If the temperature goes above 72 degrees the link will isolate the fuel supply into the safe area.
The link itself is replaceable and mounted above potential sources of heat, for example above a gas valve train or gas burner on a boiler.
The DFL10 link works with all Duomo Solenoid valves, please see our related products below.
72 degrees centigrade fuse temperature
- IP30 protective rating
- 250V AC 10A maximum load
- 20mm cable entry
- Replaceable link (contact Duomo)
| Brand | Duomo |
|---|---|
| Manufacturer Part Code | DFL10 |
| Product Type | Emergency Stop / Alarm |
| Range | Gas Safety |
| Depth | 31 mm |
| Height | 75 mm |
| Width | 52 mm |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
