8 Zone 230v Underfloor Heating Wiring Centre
In stock
Product Code
U47533
The Heatmiser UH8 underfloor heating wiring centre is designed to work with our 4 channel 230v time clock (TM4) and 230v Set back thermostat (DS-SB) but equally could be used with any 230v room thermostat.
Up to 8 zones can be controlled from the UH8. On board the UH8 are two heating time channels, each zone allows you to specify which time channel it should follow. 2 additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
A simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler.Up to 4 actuators can be connected to each zone.
•Dimensions (LxHxD) 384x148x60mm
Up to 8 zones can be controlled from the UH8. On board the UH8 are two heating time channels, each zone allows you to specify which time channel it should follow. 2 additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
A simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler.Up to 4 actuators can be connected to each zone.
•Dimensions (LxHxD) 384x148x60mm
| Brand | Heatmiser |
|---|---|
| Manufacturer Part Code | UH8 |
| Product Type | Heating Control |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
