28mm Single Clip Lock Pipe Clip Each (100 per box)

In stock
Product Code
U33671
Specification:

•Hinge design for repeated opening and closing

•Single screw fixing

•Made in the UK

•UOM Quantity - 100



Material:

Made from heat resistant polypropylene, which withstands the temperature changes in central heating systems and is effective with pipes with temperatures up to 100 degrees Celsius. Most pipes in domestic central heating systems operate at around 70 degrees Celsius



Main Advantages & Benefits:

•Large base design prevents clip being pulled into plaster and gives more support against side loads.

•Reinforcing spines down each side of the clips adds top the strength of the clip and gives it rigidity.

•Clip lock pipe clips have a hinged cover which snaps in to place over the top of the pipe. This ensures an “all round” permanent fixing for the pipe. The pipe can be easily removed for maintenance by opening the clip with the end of a screwdriver.



1. Pipe clips can be attached to the pipe to establish positioning and then fixed

2. Pipes are always parallel and are more aesthetically pleasing

3. Saves cost as only one screw, one plug and one drilled hole are required to secure two pipes



Fixing Method:

In general, central heating system pipes are classed as a “light” fixing. 5.5mm red plugs and a No.8 gauge screw are normally sufficient to secure the clips in this situation. Ensure the screw is long enough to pass through the pipe clip and fully expand the full length of the fixing plug.
More Information
BrandFM Products
Manufacturer Part CodeP102
RangePipe Fixings
Product TypePlastic Pipe Clip