16mm Masonry Nail Pipe Clips White (Each)
The nail clip provides a quick, one-piece fixing for cable, heating system pipes and tubing. It provides a flush fixing directly on to the surface of the substrate. It should not be used where pipes need ventilation or insulation; in this instance a stand-off pipe clip should be used. Material: The body is made from heat resistant polypropylene which withstands the temperature changes in central heating systems and is effective with pipes with temperatures up to 100 degrees Celsius. Most pipes in domestic central heating systems operate at around 70 degrees Celsius.The nail is hardened steel with a mechanically zinc plated finish. Main Advantages and Benefits: • The hardened pin enables the clip to be easily fixed to timber, light masonry and mortar, and using the Nail Plug can be fixed to all types of masonry. See nail plug specification sheet. • The clip body is very strong but is also flexible enough to accept a variation in pipe or cable size outside of its nominal size. • The shoulder of the clip which holds the nail is reinforced with material to help withstand the hammer blow as the nail is driven home. Never use excessive force with the hammer when driving the nail into the clip body as the plastic will always come a poor second to a hammer, and will eventually fail. Fixing Method: Most nail clips will be fixed to timber joists in loft spaces or under floors. Although the nail holder will by definition direct the nail in the correct orientation, the nail should always be hammered home in a perpendicular direction and never at an angle.
|Manufacturer Part Code||M1000|
|Product Type||Plastic Pipe Clip|